Heavy Duty Anti-Roll Bar Kit (Integrated Cups for SS)
Description
The HC&D heavy duty anti-roll bar kit with integrated uniball cups for our stock suspension brackets is a slick setup to install an ARB on a stock suspension housing. The ARB replaces the cross tube allowing it to bolt in place and be removeable. The 7 1/4" arms allow sufficient distance for the ARB link to clear the backbrace with long travel rear suspension setups.
- Billet Arms
- Billet 6061 Integrated Uniball Cups
- Heavy Duty WSSX16T Teflon Lined Uniball Bearings
- 2" x .120 4130 tube
- 3/8" heim hole
- 7 1/4" arm length center
Heavy duty anti-roll bar arm kit will include:
- 1ea 24" of 2"x.120 wall 4130 Tube
- 2ea Billet ARB Arms
- 2ea 4130 Spindle Spuds
- 2ea WSSX16T Uniball Bearings
- 2ea Billet Integrated Uniball Bearing Cups
- 2ea Snaprings
- 4ea Chassis Mount Tabs
- 4ea stock suspension bracket stepped spacers
- Grade 8 Hardware
***Welding Required
*** Arms mount inside of uniball bearings and cups. NOT to the outside like our lobed ARB***
Tab title
The HC&D heavy duty anti-roll bar kit with integrated uniball cups for our stock suspension brackets is a slick setup to install an ARB on a stock suspension housing. The ARB replaces the cross tube allowing it to bolt in place and be removeable. The 7 1/4" arms allow sufficient distance for the ARB link to clear the backbrace with long travel rear suspension setups.
- Billet Arms
- Billet 6061 Integrated Uniball Cups
- Heavy Duty WSSX16T Teflon Lined Uniball Bearings
- 2" x .120 4130 tube
- 3/8" heim hole
- 7 1/4" arm length center
Heavy duty anti-roll bar arm kit will include:
- 1ea 24" of 2"x.120 wall 4130 Tube
- 2ea Billet ARB Arms
- 2ea 4130 Spindle Spuds
- 2ea WSSX16T Uniball Bearings
- 2ea Billet Integrated Uniball Bearing Cups
- 2ea Snaprings
- 4ea Chassis Mount Tabs
- 4ea stock suspension bracket stepped spacers
- Grade 8 Hardware
***Welding Required
*** Arms mount inside of uniball bearings and cups. NOT to the outside like our lobed ARB***